Packet Filtering
4-port cooper RJ-45 GbE NIC - 1Gb Ethernet Copper RJ45 Adapters. Quad-Port Gigabit Ethernet Network Adapter - Multiport PCI Ethernet NIC - Bandwidth 8 Gbps, Quad-port Copper RJ-45 GbE NIC, Low-profile, Gen2 PCIe x4, with Intel I350 controller. Ships with both low-profile & full-height brackets.
Six-port Copper RJ-45 GbE NIC - 1Gb Ethernet Copper RJ45 Adapters. Six-port RJ-45 Gigabit Ethernet network adapter - multiport PCI Ethernet NIC, Gen2 PCIe x4, with two Intel I350 controllers. Bandwidth 12 Gbps.
Dual-port SFP GbE NIC - 1Gb Ethernet SFP Adapter - Bandwidth 4 Gbps. Dual-port (2) SFP GbE NIC, Gen2 PCIe x4, with Intel 82580 controller, low-profile. Ships with both low-profile & full-height brackets.
4-Port SFP GbE NIC - 1Gb Ethernet SFP Adapter - Bandwidth 8 Gbps. Low-profile, Quad-port (4) SFP GbE NIC, Gen2 PCIe x4, with Intel I350 controller. Supports both fiber optic and RJ45 copper transceivers. Ships with low-profile & full-height brackets.
1Gb Ethernet SFP Adapter - Bandwidth 12 Gbps. Low-profile, Six-port (6) SFP GbE NIC, Gen2 PCIe x4, with two Intel I350 controllers. Supports both fiber optic and RJ45 copper transceivers.
10Gb Ethernet SFP+ Adapter - Bandwidth 54 Gbps. Low-profile, Dual-port (2) - 10GbE SFP+ NIC, Gen2 PCIe x8, with Intel 82599 controller. Ships with both low-profile & full-height brackets.
10Gb Ethernet SFP+ Adapter - Bandwidth 100 Gbps. Low-profile, Quad-port (4) 10GbE SFP+ NIC, Gen3 PCIe x8, with Intel XL710 controller, low-profile. Ships with both low-profile & full-height bracket.
Single-port 40GbE QSFP NIC - 40Gb Ethernet QSFP+ Adapters - Multiport PCI Ethernet NIC - Low-profile, Bandwidth up to 100 Gbs. Gen3 PCIe x8, with one Intel XL710-BM2 controller. Configurable in one of two ways: 1. 1x40GbE, or 2. 4x10GbE with breakout cable.
Network Adapter 40Gb Ethernet QSFP+. Multiport PCI Ethernet NIC – Bandwidth up to 100 Gbps - Low-profile, Dual-port (2) 40 GbE QSFP NIC, Gen3 PCIe x8, with one Intel XL710-BM2 controller. Configurable in one of two ways: 1. 2x40GbE, or 2. 4x10GbE with breakout cable
Up to 8 - Port 40Gb Ethernet QSFP+ Network Adapter - Bandwidth 40 to 100 Gbps. Multiport PCI Ethernet NIC. Low profile. Dual-port (2) 40GbE QSFP NIC, Gen3 PCIe x16, with two independent Intel XL710-BM1 controllers.
Configurable in 3 variants: 1. 1x40GbE plus 1x40GbE, or 2. 1x40GbE plus 4x10GbE with one breakout cable, or 3. 4x10GbE plus 4x10GbE with two breakout cables.
40Gb Ethernet QSFP+ Adapters - Multiport PCI Ethernet NIC – Bandwidth 100 Gbps- Quad-port (4) 40GbE QSFP NIC, Gen3 PCIe x16, with two independent Intel XL710-BM2 controllers.
Configurable in one of three ways: 1. 2x40GbE plus 2x40GbE, or 2. 2x40GbE plus 4x10GbE with one breakout cable, or 3. 4x10GbE plus 4x10GbE with two breakout cables.
The Datacom CTP-1000 Gigabit Aggregation and Regeneration Network Tap is the ultimate solution for network administrators and IT organisations looking for reliable and secure monitoring capabilities. The Network Tap supports packet sizes of up to 10240 bytes (10/100/1000). The Datacom CTP-1000 enables high data visibility across the enterprise with tools from Wireshark, TamoSoft and more. This powerful tap can be easily installed between any two network devices such as firewalls, routers and others to enable streaming of data between different locations. Copies of the connection information sent (Tx) and received (Rx) are created for sophisticated monitoring or security purposes. With its affordable price, quick set-up times and robust construction, this connection will take your business to the next level of productivity and reliable efficiency. With the CTP-1000, you can rest assured that your investment is in safe Hands!
Datacom Systems 10G Link Aggregation Copper Network Tap (RJ45) with 2 x 1G/2.5G/5G/10G monitoring ports. No configuration or management required. The Datacom Systems CTP-10G Network Tap can be installed between any two network devices such as firewalls, routers or switches, enabling traffic between these network points. The Network Tap is invisible to the network. The Datacom CTP-10G Copper Network Tap enables high levels of data transparency in the Enterprise.
The Datacom 10/100 Ethernet Network Tap is a single port device that provides a simple method for 24/7 monitoring of traffic on a full duplex Ethernet segment. The 10/100 Ethernet Tap provides easy access to segments while maintaining network integrity through a no-break-the-link design. Network performance is not affected by a power failure. (Tools available from Wireshark and TamoSoft, etc.). Ideal for security applications and anywhere you need unobtrusive, dedicated 10/100 network access to your network connections.
Datacom 100 Gigabit Network Fiber Tap for 2 x 40G / 100GBase LR4 Links. Taps from Datacom Systems provide your network monitoring and security tools with passive permanent access into your for 40G / 100GBase fiber network. They provide permanent in-line access to network links - eliminating the need to disconnect and reconnect network plugs every time a segment needs to be analyzed. Our Taps allow you to view Layer 1 and 2 faults that are not visible when monitoring the network with SPAN Ports.
Datacom 40G series fiber network tap for connection with Cisco bidi links. Available in different variants. FTP-1518 and FTP 1718 depending on split ratio. The passive 40G Fiber Network Tap has 4 x LC style ports to connect to a 40G Cisco Bidi Fiber Link and 4 x LC bidirectional ports. This Fiber Network TAP from Datacom Systems provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. Available in two different split ratios.
Datacom 40G-LR4 passive network fiber tap available in different variants -FTP-1516 and FTP 1716. 40 Gb passive TAP with two 40Gb LR4 network ports and 8 LC monitor ports. This fiber network TAP from Datacom Systems provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. The 40G-LR4 pairs with a 40GBase LR4 network link and sends a copy of traffic from any device on any wavelength over the LR format LC ports. With the 40G-LR4, you can access and monitor a multi-lambda fiber link by combining 4 SFP+ single wavelength ports into a native 40GbE interface on your monitoring devices. Monitor outputs are at 1271, 1291, 1311 and 1331nm.
The Datacom 40G-SR4 is a 40 Gb passive fiber network tap and available in different variants as FTP-1514 and as FTP-1714. The Fiber Network Tap has 2 MTP ports for connecting a 12 fiber strand connection and 2 MTP output ports. Datacom Systems' 40Gb fiber taps provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. Available in a number of different split ratios.
The Datacom FTP-9000 series is a High Density Network Fiber Tap with 24 x 10 GB or 1 GB (LC) full duplex fiber links. The High Density Fiber Network Tap is ideal for security, network monitoring and end-to-end performance analysis to monitor a number of links simultaneously. This passive fiber TAP provides permanent access to 24 / 10 / 1 Gigabit fiber links. Suitable for large enterprise data centers, cloud or communications service providers, or high-performance computing environments. The 9000 family is available in different variants such as split ratio, multimode and singlemode.
Full Network Visibility for Monitoring Solutions. Datacom Network Tap VS-104 - 10/100/1000BASE-TX 4 Port Network Packet Broker with dip switch controlled configuration. Network Tap Speed X - NA and Monitoring Tool Speed X - NA.
Network Packet Broker with Data Filtering/Load Balancing, 4 x 10G/1G SFP+/SFP ports, 8 x 1G SFP ports, Dual hot swappable AC pwr supplies.