Datacom 40/100 Gigabit Passive Network Fiber Tap with 2 100GBASE-SR4 MTP Links

SKU: 10036
GTIN: 4260497576457
Category: Datacom Systems TAPs
Manufacturer: Datacom Systems

MPN:

100G-LR4

Datacom 100 Gigabit Network Fiber Tap for 2 x 40G / 100GBase LR4 Links. Taps from Datacom Systems provide your network monitoring and security tools with passive permanent access into your for 40G / 100GBase fiber network. They provide permanent in-line access to network links - eliminating the need to disconnect and reconnect network plugs every time a segment needs to be analyzed. Our Taps allow you to view Layer 1 and 2 faults that are not visible when monitoring the network with SPAN Ports.

Select

Price on request

This item has variations. Please select the requested variation.

Datacom 100 Gigabit network fiber TAP for 40G / 100GBase-LR4 links, passive TAP with LC connectors

.

Easily used in combination with many tools from WireShark, Tamosoft etc.

Datacom 40 / 100GBASE passive fiber network tap

The FTP-1546 will tap a 40GBase-LR4 or 100GBase-LR4 network link, sending a copy of traffic from each device out 2 LC ports in LR format. Uses 9 micron fiber. It provides your network monitoring and security tools with passive permanent access into your fiber network.

Benefits:

Dual speed capable fiber tap can be installed on either a 40GBase-LR4 or a 100GBase-LR4 network link.

40G: Tapped and monitor wavelengths are at 1271, 1291, 1311, and 1331nm in complaince with the 40GBASE-LR4 standard.
100G: Tapped and monitor wavelengths are at 1295.56, 1300.05, 1304.59 and 1309.14nm in complaince with the 100GBASE-LR4 standard.

The FTP-1546 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.

Non-powered, passive tap
Optional 1U rack mount holds 3 taps
4U 12 bay rack available

Features:

NETWORK PORT

Two (2) 100Gb LR4 LC Network Connections

MONITOR PORT

Two (2) 100Gb LR4 LC Monitor Connections

SPLIT RATIO

50/50

INSERTION LOSS**

Network Ports: 4.0 dB insertion loss
Monitor Ports: 3.5 dB insertion loss

Software

In order to perform a successful network analysis, we recommend either the free software from wireshark or the relate software from Tamosoft.

You can find Wireshark's software here.

You can find the Tamosoft software here.

PHYSICAL DIMENSIONS (H x W x D)

1.07 x 5 x 5 in.
(2.7 x 12.7 x 12.7 cm)

WEIGHT

12 oz (0.34 kgs)

ENVIRONMENTAL

Operating Temperature: 32º to 104ºF (0° to 40°C)
Storage Temperature: -22º to 149ºF (-30° to 65°C )
Humidity: 5 to 90% non-condensing

Optional Equipment

RMC-3 3-Unit Rack Mount
RMC-12-3 12-Unit Rack Mount

Product Type:	Network TAPS
Port-Speed:	100Gb
Network Tap Speed:	100G/40G
Monitoring Tool Speed:	100G/40G
Network Port Numbers:	1-Port
Applications:	Monitoring Network analysis Performance Security Copying Load Balancing Packet Filtering Failover In-Line monitoring