Datacom Systems
Datacom Systems TAP
Datacom Systems TAP at the official partner IPNetshop.com
Datacom Systems is a leading manufacturer of network solutions for 100% visibility of your enterprise network. Only what you see, you can control! Datacom Systems equipment covers millions of network segments worldwide and saves its customers millions of dollars in IT expenses each year. Datacom manufactures the following products: Network TAPS Provides secure in-line access to your network for security, analysis and monitoring. SINGLEstream Link Aggregation Taps combine full-duplex data into a single stream. VERSAream Network Packet Brokers are multi-port devices that allow one or more network tools to monitor multiple points of interest in a network. DURAstream Bypass Switches provide easy-to-manage failover and tap monitoring for critical network segments.
The SINGLEstream SS-G4C8C4S Multi-Link Copper Mesh Tap with 12 Monitor Ports is a compact and flexible solution for collecting, aggregating, and distributing data from multiple sources to monitoring tools. It is a multi-link tap that can use 4 copper 100/1000 connections. The SFP+ ports can be used as 10G copper or fiber links. They can serve as additional monitor ports and support DAC (Direct Attach Cables). Datacom SINGLEstream copper network tap with 4 x 10/100/1000 network tap (2 ports per tap), Eight copper 10/100/1000 BT ports and four SFP+ any-to-any ports.
Datacom Network Tap SS-G6C4C4S - SINGLEstream Six (6) copper 10/100/1000 taps (2 ports per tap), four (4) copper 10/100/1000-BT and four (4) SFP+ Any-to-Any ports. Network Tap Speed 10/100/1000BASE-TX and Monitoring Tool Speed 1G/10G Fiber, 10/100/1000/10G Copper. Scalable, flexible, powerful and compact. he SINGLEstream SS-G6C4C4S multi-link copper tap is a compact and flexible solution for tapping, aggregating and distributing data from multiple sources, to monitoring tools. It is a multi-link tap capable of tapping 6 copper 10/100/1000 links.
The SINGLEstream SS-G8C4S multi-link copper Network AGGREGATION tap is a compact and flexible solution for tapping, aggregating and distributing data from multiple sources, to monitoring tools. It is a multi-link tap capable of tapping 8 copper 100/1000 links. The SFP+ ports may be used as 10G copper or fiber interconnects, can serve as additional monitor ports, and support DAC (Direct Attach Cables.) Scalable, flexible, powerful and compact.
The Datacom CTP-1000 Gigabit Aggregation and Regeneration Network Tap is the ultimate solution for network administrators and IT organisations looking for reliable and secure monitoring capabilities. The Network Tap supports packet sizes of up to 10240 bytes (10/100/1000). The Datacom CTP-1000 enables high data visibility across the enterprise with tools from Wireshark, TamoSoft and more. This powerful tap can be easily installed between any two network devices such as firewalls, routers and others to enable streaming of data between different locations. Copies of the connection information sent (Tx) and received (Rx) are created for sophisticated monitoring or security purposes. With its affordable price, quick set-up times and robust construction, this connection will take your business to the next level of productivity and reliable efficiency. With the CTP-1000, you can rest assured that your investment is in safe Hands!
Datacom Systems 10G Link Aggregation Copper Network Tap (RJ45) with 2 x 1G/2.5G/5G/10G monitoring ports. No configuration or management required. The Datacom Systems CTP-10G Network Tap can be installed between any two network devices such as firewalls, routers or switches, enabling traffic between these network points. The Network Tap is invisible to the network. The Datacom CTP-10G Copper Network Tap enables high levels of data transparency in the Enterprise.
The Datacom 10/100 Ethernet Network Tap is a single port device that provides a simple method for 24/7 monitoring of traffic on a full duplex Ethernet segment. The 10/100 Ethernet Tap provides easy access to segments while maintaining network integrity through a no-break-the-link design. Network performance is not affected by a power failure. (Tools available from Wireshark and TamoSoft, etc.). Ideal for security applications and anywhere you need unobtrusive, dedicated 10/100 network access to your network connections.
Network Packet Broker (NPB) Datacom Systems VS-M8S2Q with 1G/10G/40G links. Take control of your network, eliminate blind spots, and reduce network downtime. This Tap Monitors 40Gsources with 10G Tools • Support up to 16 1G/1G ports in a compact unit using breakout cables • Use data filtering to minimize oversubscription risk and optimize performance of monitoring Tools.
Datacom 100 Gigabit Network Fiber Tap for 2 x 40G / 100GBase LR4 Links. Taps from Datacom Systems provide your network monitoring and security tools with passive permanent access into your for 40G / 100GBase fiber network. They provide permanent in-line access to network links - eliminating the need to disconnect and reconnect network plugs every time a segment needs to be analyzed. Our Taps allow you to view Layer 1 and 2 faults that are not visible when monitoring the network with SPAN Ports.
Datacom 40G series fiber network tap for connection with Cisco bidi links. Available in different variants. FTP-1518 and FTP 1718 depending on split ratio. The passive 40G Fiber Network Tap has 4 x LC style ports to connect to a 40G Cisco Bidi Fiber Link and 4 x LC bidirectional ports. This Fiber Network TAP from Datacom Systems provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. Available in two different split ratios.
Datacom 40G-LR4 passive network fiber tap available in different variants -FTP-1516 and FTP 1716. 40 Gb passive TAP with two 40Gb LR4 network ports and 8 LC monitor ports. This fiber network TAP from Datacom Systems provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. The 40G-LR4 pairs with a 40GBase LR4 network link and sends a copy of traffic from any device on any wavelength over the LR format LC ports. With the 40G-LR4, you can access and monitor a multi-lambda fiber link by combining 4 SFP+ single wavelength ports into a native 40GbE interface on your monitoring devices. Monitor outputs are at 1271, 1291, 1311 and 1331nm.
The Datacom 40G-SR4 is a 40 Gb passive fiber network tap and available in different variants as FTP-1514 and as FTP-1714. The Fiber Network Tap has 2 MTP ports for connecting a 12 fiber strand connection and 2 MTP output ports. Datacom Systems' 40Gb fiber taps provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. Available in a number of different split ratios.
