40Gb

Single-port 40GbE QSFP NIC - 40Gb Ethernet QSFP+ Adapters - Multiport PCI Ethernet NIC - Low-profile, Bandwidth up to 100 Gbs. Gen3 PCIe x8, with one Intel XL710-BM2 controller. Configurable in one of two ways: 1. 1x40GbE, or 2. 4x10GbE with breakout cable.

Network Adapter 40Gb Ethernet QSFP+. Multiport PCI Ethernet NIC – Bandwidth up to 100 Gbps -  Low-profile, Dual-port (2) 40 GbE QSFP NIC, Gen3 PCIe x8, with one Intel XL710-BM2 controller. Configurable in one of two ways: 1. 2x40GbE, or 2. 4x10GbE with breakout cable

Up to 8 - Port 40Gb Ethernet QSFP+ Network Adapter - Bandwidth 40 to 100 Gbps. Multiport PCI Ethernet NIC. Low profile. Dual-port (2) 40GbE QSFP NIC, Gen3 PCIe x16, with two independent Intel XL710-BM1 controllers.

Configurable in 3 variants: 1. 1x40GbE plus 1x40GbE, or 2. 1x40GbE plus 4x10GbE with one breakout cable, or 3. 4x10GbE plus 4x10GbE with two breakout cables.

40Gb Ethernet QSFP+ Adapters - Multiport PCI Ethernet NIC – Bandwidth 100 Gbps- Quad-port (4) 40GbE QSFP NIC, Gen3 PCIe x16, with two independent Intel XL710-BM2 controllers.

Configurable in one of three ways: 1. 2x40GbE plus 2x40GbE, or 2. 2x40GbE plus 4x10GbE with one breakout cable, or 3. 4x10GbE plus 4x10GbE with two breakout cables.

Datacom 40G series fiber network tap for connection with Cisco bidi links. Available in different variants. FTP-1518 and FTP 1718 depending on split ratio. The passive 40G Fiber Network Tap has 4 x LC style ports to connect to a 40G Cisco Bidi Fiber Link and 4 x LC bidirectional ports. This Fiber Network TAP from Datacom Systems provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. Available in two different split ratios.

Datacom 40G-LR4 passive network fiber tap available in different variants -FTP-1516 and FTP 1716. 40 Gb passive TAP with two 40Gb LR4 network ports and 8 LC monitor ports. This fiber network TAP from Datacom Systems provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. The 40G-LR4 pairs with a 40GBase LR4 network link and sends a copy of traffic from any device on any wavelength over the LR format LC ports. With the 40G-LR4, you can access and monitor a multi-lambda fiber link by combining 4 SFP+ single wavelength ports into a native 40GbE interface on your monitoring devices. Monitor outputs are at 1271, 1291, 1311 and 1331nm.

The Datacom 40G-SR4 is a 40 Gb passive fiber network tap and available in different variants as FTP-1514 and as FTP-1714. The Fiber Network Tap has 2 MTP ports for connecting a 12 fiber strand connection and 2 MTP output ports. Datacom Systems' 40Gb fiber taps provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. Available in a number of different split ratios.