Network TAPS
Overview of Datacom network TAPS
Passive network TAPS offer considerable data transparency in the network. Tapping data streams reliably. They do not change the status of the connection even if the TAP loses power.Datacom 40G series fiber network tap for connection with Cisco bidi links. Available in different variants. FTP-1518 and FTP 1718 depending on split ratio. The passive 40G Fiber Network Tap has 4 x LC style ports to connect to a 40G Cisco Bidi Fiber Link and 4 x LC bidirectional ports. This Fiber Network TAP from Datacom Systems provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. Available in two different split ratios.
Datacom 40G-LR4 passive network fiber tap available in different variants -FTP-1516 and FTP 1716. 40 Gb passive TAP with two 40Gb LR4 network ports and 8 LC monitor ports. This fiber network TAP from Datacom Systems provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. The 40G-LR4 pairs with a 40GBase LR4 network link and sends a copy of traffic from any device on any wavelength over the LR format LC ports. With the 40G-LR4, you can access and monitor a multi-lambda fiber link by combining 4 SFP+ single wavelength ports into a native 40GbE interface on your monitoring devices. Monitor outputs are at 1271, 1291, 1311 and 1331nm.
The Datacom 40G-SR4 is a 40 Gb passive fiber network tap and available in different variants as FTP-1514 and as FTP-1714. The Fiber Network Tap has 2 MTP ports for connecting a 12 fiber strand connection and 2 MTP output ports. Datacom Systems' 40Gb fiber taps provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. Available in a number of different split ratios.