Datacom TS-1408 SINGLEstream 10G/1G Fiber Aggregation Network Tap, 6 monitor ports, with Media Conversion

SKU: 10065
GTIN: 4260497576655
Category: Datacom Systems TAPs
Manufacturer: Datacom Systems

MPN:

TS-1408

Fiber Link Aggregation Network TAP with flexible Line-Rate 10G/1G. Supports 1 tapped link, 6 any-to-any / monitor ports for Cost Effective Data Capture and Monitoring Applications

Micron

Price on request

This item has variations. Please select the requested variation.

Datacom Network Tap TS-1408 - SINGLEstream 10G Link Aggregation Tap, 1 - 10G SR MM Tap, 6 - 10G SFP+ monitor ports, Dual hot swappable AC pwr. Network Tap Speed 10G/1G and Monitoring Tool Speed 10G/1G.

Passive Tapping

This Fiber Link Aggregation Switch Network TAP is ideal for security applications, network monitoring - anywhere which requires visibility into all the data that only an In-line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity. A copy of all traffic from the network links is passively copied for monitoring. In the rare event of power loss, traffic is unaffected on connected network devices.

Aggregation (Many-to-Any)

Many-to-Any monitoring access aggregates network traffic and provides visibility for one or more monitoring tools. Aggregate and reassemble full duplex conversations from one or more trunked links. Perfect for tools that don’t support multiple monitoring interfaces or for redundant networks, EtherChannel, load balanced servers, and asymmetrically routed traffic.

Regeneration (Any-to-Many)

Any-to-Many configurations replicate copies of identical network traffic to provide multiple tools with monitoring access to the same links. In addition to eliminating contention for scarce SPAN ports and test access points, multiple tools can be connected to the same link for redundancy, testing, or advanced monitoring applications.

Port Steering (Any-Any)

The monitoring ports can be configured as input (Network) or output (Monitor) ports on the fly through an easy to use command line interface (CLI). The designation of these ports may be changed as needs evolve.

Robust Management, Security, and Logging

Manage your switch using built-in, easy to use CLI. Supports Remote Management , E-mail notifications, and event logging to monitor changes to the Tap and the connected devices.

Features:

PORTS

Any-to-Any Ports: Six (6) SFP+
(Supports SFP+ SR, LR, LRM, SFP SX, LX, BT)
Tap Ports: Two (2) 10/1G Fiber
Management Port: RJ45
Console Port: DB9

INSERTION LOSS

Multimode (50/62.5 micron diameter) 50/50 = 4.2 dB
Multimode (50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
Singlemode (9 micron diameter) 50/50 = 3.9 dB Singlemode
(9 micron diameter) 70/30 = 2.2 / 6.3 dB

*approximate per fiber

10G/1G Fiber Aggregation Tap with
Media Conversion
ORDER INFORMATION

POWER REQUIREMENTS

Dual Redundant Hot Swappable Power Supplies (Included)
Maximum Power Consumption: Less than 90 Watts
Individual Power Supply Rating: 100-240V ~50-60Hz 7A MAX.

Software

In order to perform a successful network analysis, we recommend either the free software from wireshark or the relate software from Tamosoft.

You can find the Wireshark software here.

You can find the Tamosoft software here.

DIMENSIONS (HXWXD)

1.5 x 8.3 x 12.5 in (3.81 x 21.08 x 31.75 cm)

WEIGHT

3.75 lbs (1.7 kgs)

ENVIRONMENTAL

Operating Temperature: 32º to 104ºF (0º to 40ºC)
Storage Temperature: -22º to 149ºF (-30º to 65ºC)
Humidity: 5 to 90% non-condensing

Optional Equipment

SFP+ -SR/SX
SFP+ - LR/LX
SFP - SX
SFP - LX
SFP - RJ45
RMC- 2C

Product Type:	Singlestream Link Aggregation Taps Fiber Network TAPS Passive TAP SFP or SFP+ Copper Aggregation
Port-Speed:	10Gb
Network Tap Speed:	10G/1G
Monitoring Tool Speed:	10G/1G
Applications:	Monitoring Network analysis Performance Aggregation Load Balancing Remote Management In-Line monitoring
Network Port Numbers:	8-Port