10Gb
10Gb Ethernet SFP+ Adapter - Bandwidth 54 Gbps. Low-profile, Dual-port (2) - 10GbE SFP+ NIC, Gen2 PCIe x8, with Intel 82599 controller. Ships with both low-profile & full-height brackets.
10Gb Ethernet SFP+ Adapter - Bandwidth 100 Gbps. Low-profile, Quad-port (4) 10GbE SFP+ NIC, Gen3 PCIe x8, with Intel XL710 controller, low-profile. Ships with both low-profile & full-height bracket.
Single-port 40GbE QSFP NIC - 40Gb Ethernet QSFP+ Adapters - Multiport PCI Ethernet NIC - Low-profile, Bandwidth up to 100 Gbs. Gen3 PCIe x8, with one Intel XL710-BM2 controller. Configurable in one of two ways: 1. 1x40GbE, or 2. 4x10GbE with breakout cable.
Network Adapter 40Gb Ethernet QSFP+. Multiport PCI Ethernet NIC – Bandwidth up to 100 Gbps - Low-profile, Dual-port (2) 40 GbE QSFP NIC, Gen3 PCIe x8, with one Intel XL710-BM2 controller. Configurable in one of two ways: 1. 2x40GbE, or 2. 4x10GbE with breakout cable
Up to 8 - Port 40Gb Ethernet QSFP+ Network Adapter - Bandwidth 40 to 100 Gbps. Multiport PCI Ethernet NIC. Low profile. Dual-port (2) 40GbE QSFP NIC, Gen3 PCIe x16, with two independent Intel XL710-BM1 controllers.
Configurable in 3 variants: 1. 1x40GbE plus 1x40GbE, or 2. 1x40GbE plus 4x10GbE with one breakout cable, or 3. 4x10GbE plus 4x10GbE with two breakout cables.
40Gb Ethernet QSFP+ Adapters - Multiport PCI Ethernet NIC – Bandwidth 100 Gbps- Quad-port (4) 40GbE QSFP NIC, Gen3 PCIe x16, with two independent Intel XL710-BM2 controllers.
Configurable in one of three ways: 1. 2x40GbE plus 2x40GbE, or 2. 2x40GbE plus 4x10GbE with one breakout cable, or 3. 4x10GbE plus 4x10GbE with two breakout cables.
Datacom Systems 10G Link Aggregation Copper Network Tap (RJ45) with 2 x 1G/2.5G/5G/10G monitoring ports. No configuration or management required. The Datacom Systems CTP-10G Network Tap can be installed between any two network devices such as firewalls, routers or switches, enabling traffic between these network points. The Network Tap is invisible to the network. The Datacom CTP-10G Copper Network Tap enables high levels of data transparency in the Enterprise.
The TITAN TCTB-MSW13001-19 Layer3 Switch is a 28 port switch with 24 x 10G SFP+ and 4 x 100G QSFP28 ports, rackmount. Powerful 100Gbps Solution for All Long-Reach Networks and meets the next generation Metro, Data Center, Campus and Enterprise network requirements. It has high-density 24 10G SFP+ and 4 40G/100GbE QSFP28 fiber interfaces delivered in a 1RU rugged case.
TITAN TCTB-MSW13006-21 1G/10G Layer 3 Network Switch with 52 ports, rackmount. The TITAN TCTB-MSW13006-21 Layer 3 Managed Switch features 48 x 100/1000Mbps SFP ports with 2 shared RJ45 copper ports on the front and 4 x 10G SFP+ ports on the rear. With Layer 3 IP routing in a 19-inch metal chassis, the network switch offers very high power density. With an uplink of 10 Gbps and a switching fabric of 176 Gbps, the TITAN TCTB-MSW13006-21 simplifies the processing of extremely large amounts of data in a secure topology.