Datacom SS-2206SX-SFP-S SINGLEstream 1G Link Aggregation Network Tap

Datacom SS-2206SX-SFP-S SINGLEstream 1G Link Aggregation Network Tap

SKU: 10056
GTIN: 4260497576617
Category: Datacom Systems TAPs
Manufacturer: Datacom Systems

MPN:

SS-2206SX-SFP-S

small> Datacom SINGLEstream 1G Link Aggregation (2) LC Singlemode Fiber Network Tap Full duplex visibility for single interface monitoring solutions

Price on request

Datacom Network Tap SS-2206SX-SFP-S - SINGLEstream Dual Link Aggregation TAP (2 - 1000SX [specify 50 or 62.5 micron] TAPs, 2 - SFP Any-to-Any Ports) w/ SSH, SNMP. Network Tap Speed 1G and Monitoring Tool Speed 10/100/1000BASE-TX and 1G.

Easily used in combination with many tools from WireShark, Tamosoft, etc.

Datacom SS-2206SX-SFP-S SINGLEstream 1G Link Aggregation Network Tap

The SINGLEstream SS-2206SX-SFP-S Link Aggregation Network Tap is inserted inline (ports 1,2 and 5,6) then makes copies of the network traffic to combine it into a single output. The SFP based monitoring ports of this Link Aggregation Switch - Network Tap (ports 3 and 4), allow you can have 2 copies of that aggregate data, or when link utilization is high, keep the full duplex streams separate. For additional flexibility, the monitor ports can also receive traffic from an external mirror port or another tap, providing you the ability to tap a link and add other traffic into a single output port.

Benefits:

View entire full-duplex conversations using single interface monitoring tools
Fiber tap ports provide passive permanent access to traffic
Monitor fiber links with copper media monitoring tools
Decrease reliance on switch resources for network management visibility
Eliminate SPAN port contention, oversubscription, and configuration errors
Deploy tools immediately without impacting your production network
Easily share tap ports for improved monitoring without maintenance windows
Single point of deployment and remote management minimizes management expenses and MTTR

PORTS

Network: Two(2) 1000 Network Tap (LC) (Specify 50 or 62.5 micron)
Monitoring: Two (2) 10/100/1000 Any-to-Any Ports (SFP)
Management (front): RJ45 @ 100 Mbps Full-Duplex
Serial (rear): DB9F

SPLIT RATIO

50/50, 70/30, 80/20
Additional Split Ratios Available

INSERTION LOSS*

Multimode (Specify 50 or 62.5 micron) 50/50 = 4.2 dB
Multimode (Specify 50 or 62.5 micron) 70/30 = 2.2 / 6.3 dB

* typical per fiber

POWER REQUIREMENTS

Two (2) External AC Adapters (included)
Input: 100-240 VAC, 50-60Hz, 0.8A

Software

In order to perform a successful network analysis, we recommend either the free software from wireshark or the relate software from Tamosoft.

You can find the Wireshark software here.

You can find the Tamosoft software here.

PHYSICAL DIMENSIONS (H x W x D)

1.10 x 8.00 x 7.00 in (2.79 x 20.32 x 17.78 cm)

WEIGHT

1.6 lbs (0.7 kgs)

ENVIRONMENT

Operating Temperature: 32º to 104ºF (0° to 40°C)
Storage Temperature: -22º to 149ºF (-30° to 65°C )
Humidity: 5 to 90% non-condensing

Product Type:	Singlestream Link Aggregation Taps Network TAPS SFP or SFP+ RJ45 Aggregation Fiber
Port-Speed:	10/100/1000Gb
Network Tap Speed:	1G
Monitoring Tool Speed:	10/100/1000BASE-TX and 1G
Applications:	Monitoring Network analysis Performance Aggregation Load Balancing Remote Management In-Line monitoring
Network Port Numbers:	6-Port