Datacom TS-1404 SINGLEstream 10G/1G Fiber Aggregation Network Tap with Media Conversion TS-1404-75 - 70/30 - 50 micron, Dual hot swappable AC pwr Fiber Netzwork Tap

SKU: 10063-007
GTIN: 4260497577249
Category: Datacom Systems TAPs
Manufacturer: Datacom Systems

MPN:

TS-1404-75

Fiber Link Aggregation Switch - Network Tap with flexible line rate 10G / 1G

Micron

Price on request

Datacom Network Tap TS-1404-75 - SINGLEstream 10G Link Aggregation Tap, 1 - 10G SR MM Tap 70/30 split ratio 50 micron, 2 - 10G SFP+ monitor ports, Dual hot swappable AC pwr. Network Tap Speed 10G/1G and Monitoring Tool Speed 10G/1G.

These Link Aggregation Switch - Network Tap Fiber are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.

A copy of traffic from the network links are passively copied for monitoring. In the rare event of power loss, with this Link Aggregation Switch - Network Tap traffic is completely unaffected on connected network devices.

Benefits:

Consolidate monitoring tools to reduce management expenses and lower tool costs
Single point of deployment and remote management minimizes management expenses and reduces MTTR
Monitor 10G links with 1G tools for increased ROI and more efficient use of monitoring resources
After installation, deploy tools right away without impacting your production network
Receives traffic from additional taps or SPAN ports to allow you to increase the scale of intallation
Connecting two or more similar tools brings additional redundancy to the monitoring solution.

Benefits:

Aggregation/Regeneration - Combine multiple network links or channels into one stream or send copies to multiple connected tools to share data sourcest
Media Conversion - Leverage existing monitoring tools regardless of media typet
Port Speeds ranging from 1000Mbps to 10Gbpst
All ports active with full features - no per port/feature licensingt
Manage device remotely or locally with extensive CLI (telnet/SSH)t
Dual Redundant Power ensures monitoring uptimet
E-mail event notifications on user-defined eventst
NTP Supportt
Local Syslog Support

Features:

PORTS

Tap Ports: Two (2) 10/1G Fiber
Any-to-Any Ports: Two (2) SFP+/SFP
(Supports SFP+ SR, LR, LRM, SFP SX, LX, BT)
Management Port: RJ45
Console Port: DB9

POWER REQUIREMENTS

Dual Redundant Hot Swappable Power Supplies (Included)
Maximum Power Consumption: Less than 90 Watts
Individual Power Supply Rating: 100-240V ~50-60Hz 7A MAX.

Software

In order to perform a successful network analysis, we recommend either the free software from wireshark or the relate software from Tamosoft.

You can find the Wireshark software here.

You can find the Tamosoft software here.

DIMENSIONS (HXWXD)

1.5 x 8.3 x 12.5 in (3.81 x 21.08 x 31.75 cm)

WEIGHT

3.75 lbs (1.7 kgs)

ENVIRONMENTAL

Operating Temperature: 32º to 104ºF (0º to 40ºC)
Storage Temperature: -22º to 149ºF (-30º to 65ºC)
Humidity: 5 to 90% non-condensing

INSERTION LOSS

Multimode (50/62.5 micron diameter) 50/50 = 4.2 dB
Multimode (50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
Singlemode (9 micron diameter) 50/50 = 3.9 dB
Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB

Product Type:	Network TAPS SFP or SFP+ Copper Aggregation Fiber Singlestream Link Aggregation Taps
Port-Speed:	10Gb
Network Tap Speed:	10G/1G
Monitoring Tool Speed:	10G/1G
Applications:	Monitoring Network analysis Performance Aggregation Load Balancing Remote Management In-Line monitoring
Network Port Numbers:	4-Port