TITAN 6 Port Industrial Ethernet POE Gigabit 10/100/1000 Switch unmanaged

TITAN 6 Port Industrial Ethernet POE Gigabit 10/100/1000 Switch unmanaged

SKU: 10011
Category: TITAN Commerce
Manufacturer: TITAN Commerce

MPN:

TCXK-ISW15004-12

TITAN TCXK-ISW15004-12 UL certification

Price on request

TITAN 6 Port Industrial Ethernet POE Gigabit 10/100/1000 Switch unmanaged

TITAN TCXK-ISW15004-12

TCXK-ISW15004-12 is an unmanaged PoE Ethernet switch with P.S.E. function. It supports Power over Ethernet, a system to transmit electrical power,along with data, to remote devices over standard twisted-pair cable in an Ethernet network. It has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, 1 additional Gigabit port, and 1x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. This model also supports wide range 24~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40 to 60°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

Features

4x10/100/1000Base-T(X) PoE (P.S.E.) ports
Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
Support dual wide range 24~36VDC power inputs for power redundancy
SFP port supports 100Base-FX and 1000Base-X speed
Supports auto-negotiation and auto-MDI/MDI-X
Supports store and forward transmission
Supports flow control
Rigid IP-30 housing design
DIN-Rail and wall mounting enabled

Technical Information

Ethernet-Standards

IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3at PoE specifications (up to 30 Watts per port for P.S.E.)

LED-Indicators

Power Indicator Green : Power LED x 2
Fault Indicator Amber : Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port indicator and PoE Indicator (P1 ~ P4)
Green for port Link/Act
Green for power injected
10/100/1000Base-T(X) RJ45 port Indicator (P5)
Green for port Link/Act.
Amber for 100Mbps Indicator
100/1000Base-X SFP port indicator
Green for port Link/Act.

SFP Speed DIP-Switch

DIP-Schalter ½
DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps

Relay Output DIP-Switch

DIP-Switch 1 Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2 Power-2 failed warning : (ON) enable, (OFF) disable

Fault contact

Relay Relay output to carry capacity of 1A at 24VDC
Power
- Redundant Input power Dual DC inputs. 24~36VDC for 6-pin terminal block
- Power consumption (Typ.) 6.5 Watts (power device not included)
- Overload current protection Present
- Reverse polarity protection Not Present
Physical Characteristics
- Enclosure IP-30
- Dimensions 41 (W) x 94.9 (D) x 144.3(H) mm
- Weight (g) 580 g
Environment
- Storage temperature -40 to 85°C (-40 to 185°F)
- Operating temperature -40 to 60°C (-40 to 140°F)
- Operating humidity 5% to 95% Non-condensing
Regulatory Approvals
- EMI FCC Part 15, CISPR (EN55022) Class A
- EMS
- EN61000-4-2 (ESD)
- EN61000-4-3 (RS)
- EN61000-4-4 (EFT)
- EN61000-4-5 (Surge)
- EN61000-4-6 (CS)
- EN61000-4-8
- EN61000-4-11
- Schock IEC60068-2-27
- Freifall IEC60068-2-32
- Vibration IEC60068-2-6
- Sicherheit EN60950-1
- MTBF 652735.8632
Weight
- 0,71 kg
Physical dimension (HxWxD)
- 14,3 x 9,5 x 4 cm