TEST media/image/product/1412/lg/titan-6-port-industrial-ethernet-poe-gigabit-10-100-1000-switch-unmanaged.png

Network technology

/ Switches / Tap's / NIC's / Network ANALYSIS SOFTWARE
TITAN 6 Port Industrial Ethernet POE Gigabit 10/100/1000 Switch unmanaged
TITAN TCXK-ISW15004-12 UL certification

Price on request

Recommend Product:

TITAN 6 Port Industrial Ethernet POE Gigabit 10/100/1000 Switch unmanaged


TCXK-ISW15004-12 is an unmanaged PoE Ethernet switch with P.S.E. function. It supports Power over Ethernet, a system to transmit electrical power,along with data, to remote devices over standard twisted-pair cable in an Ethernet network. It has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, 1 additional Gigabit port, and 1x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. This model also supports wide range 24~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40 to 60°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.


  • 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
  • Supports P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
  • Support dual wide range 24~36VDC power inputs for power redundancy
  • SFP port supports 100Base-FX and 1000Base-X speed
  • Supports auto-negotiation and auto-MDI/MDI-X
  • Supports store and forward transmission
  • Supports flow control
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled

Technical Information


  • IEEE 802.3 for 10Base-T
  • IEEE 802.3u for 100Base-TX
  • IEEE 802.3ab for 1000Base-T
  • IEEE 802.3z for 1000Base-X
  • IEEE 802.3x for Flow control
  • IEEE 802.3at PoE specifications (up to 30 Watts per port for P.S.E.)


  • Power Indicator Green : Power LED x 2
  • Fault Indicator Amber : Indicate PWR1 or PWR2 failure
  • 10/100/1000Base-T(X) RJ45 port indicator and PoE Indicator (P1 ~ P4)
  • Green for port Link/Act
  • Green for power injected
  • 10/100/1000Base-T(X) RJ45 port Indicator (P5)
  • Green for port Link/Act.
  • Amber for 100Mbps Indicator
  • 100/1000Base-X SFP port indicator
  • Green for port Link/Act.

SFP Speed DIP-Switch

  • DIP-Schalter ½
  • DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
  • DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps

Relay Output DIP-Switch

  • DIP-Switch 1 Power-1 failed warning : (ON) enable, (OFF) disable
  • DIP-Switch 2 Power-2 failed warning : (ON) enable, (OFF) disable

Fault contact

  • Relay Relay output to carry capacity of 1A at 24VDC


    • Redundant Input power Dual DC inputs. 24~36VDC for 6-pin terminal block
    • Power consumption (Typ.) 6.5 Watts (power device not included)
    • Overload current protection Present
    • Reverse polarity protection Not Present

    Physical Characteristics

    • Enclosure IP-30
    • Dimensions 41 (W) x 94.9 (D) x 144.3(H) mm
    • Weight (g) 580 g


    • Storage temperature -40 to 85°C (-40 to 185°F)
    • Operating temperature -40 to 60°C (-40 to 140°F)
    • Operating humidity 5% to 95% Non-condensing

    Regulatory Approvals

    • EMI FCC Part 15, CISPR (EN55022) Class A
    • EMS
    • EN61000-4-2 (ESD)
    • EN61000-4-3 (RS)
    • EN61000-4-4 (EFT)
    • EN61000-4-5 (Surge)
    • EN61000-4-6 (CS)
    • EN61000-4-8
    • EN61000-4-11
    • Schock IEC60068-2-27
    • Freifall IEC60068-2-32
    • Vibration IEC60068-2-6
    • Sicherheit EN60950-1
    • MTBF 652735.8632


    • 0,71 kg

    Physical dimension (HxWxD)

    • 14,3 x 9,5 x 4 cm