Network Taps Datacom
Datacom network TAPS protect the integrity of your network without any impairment.
Choosing how to get data from your network and into your monitoring and security tools is just as important as the tools themselves. It's easy with the datacom switches. Network taps are one of today’s best methods for creating permanent in-line monitoring ports for your packet analyzers, intrusion detection systems, IDS, data retention compliance devices and other analytic network tools. To accomplish this, taps are inserted between network devices, where they copy data continuously, 24/7, without compromising network integrity. Also, taps are available with a variety of features for both copper and fiber networks and they maintain connectivity, even after power loss to the tap. It’s for these reasons that network architects select taps over port mirroring alone to improve monitoring and security. And it’s why they are a proven, critical part of the highest performing networks today. Select Datacom Systems taps or datacom switches as your choice for gaining the visibility you need to make your network efficient, secure and compliant.
The Datacom CTP-1000 is a compact 10/100/1000 link aggregation network tap for lossless full-duplex traffic monitoring. It combines inbound and outbound data streams into a single monitoring output, simplifying analysis with single-interface tools. Featuring Any-to-Any monitoring ports with PoE support, SSH/SNMP remote management, and redundant power input, the CTP-1000 is ideal for security monitoring, performance analysis, troubleshooting, and forensic network investigations.
The Datacom Systems CTP-10G Copper Network Tap is an advanced tap solution for monitoring 1G to 10G copper connections between network devices such as firewalls and routers. Featuring cutting-edge 10G copper technology, this tap offers exceptional performance and efficiency. It enables precise traffic analysis and monitoring by creating and reliably forwarding both Rx and Tx data copies to security or monitoring tools. The CTP-10G not only provides detailed insights into your network performance but also enhances the security and efficiency of your network Architecture.
The Datacom-Systems 10/100 Ethernet Network Tap is an efficient single port device for 24/7 monitoring of full duplex Ethernet segments. The Network Tap allows access to network segments without disturbing the network integrity thanks to the "no-break-the-link" design. Network performance remains stable even in the event of a power failure. Compatible with analysis tools such as Wireshark, this tap is ideal for security applications and provides reliable access in 10/100 networks.
The Datacom Systems 10/100/1000 Ethernet Tap provides easy 24x7 access to your 10/100/1000 Gigabit Ethernet network segments and is an ideal network TAP for troubleshooting Ethernet networks with multiple port speeds. Suitable for security monitoring applications for balanced data visibility.
Datacom 100 Gigabit Network Fiber Tap for 2 x 40G / 100GBase LR4 Links. Taps from Datacom Systems provide your network monitoring and security tools with passive permanent access into your for 40G / 100GBase fiber network. They provide permanent in-line access to network links - eliminating the need to disconnect and reconnect network plugs every time a segment needs to be analyzed. Our Taps allow you to view Layer 1 and 2 faults that are not visible when monitoring the network with SPAN Ports.
Datacom 40G series fiber network tap for connection with Cisco bidi links. Available in different variants. FTP-1518 and FTP 1718 depending on split ratio. The passive 40G Fiber Network Tap has 4 x LC style ports to connect to a 40G Cisco Bidi Fiber Link and 4 x LC bidirectional ports. This Fiber Network TAP from Datacom Systems provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. Available in two different split ratios.
Datacom 40G-LR4 passive network fiber tap available in different variants -FTP-1516 and FTP 1716. 40 Gb passive TAP with two 40Gb LR4 network ports and 8 LC monitor ports. This fiber network TAP from Datacom Systems provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. The 40G-LR4 pairs with a 40GBase LR4 network link and sends a copy of traffic from any device on any wavelength over the LR format LC ports. With the 40G-LR4, you can access and monitor a multi-lambda fiber link by combining 4 SFP+ single wavelength ports into a native 40GbE interface on your monitoring devices. Monitor outputs are at 1271, 1291, 1311 and 1331nm.
The Datacom 40G-SR4 is a 40 Gb passive fiber network tap and available in different variants as FTP-1514 and as FTP-1714. The Fiber Network Tap has 2 MTP ports for connecting a 12 fiber strand connection and 2 MTP output ports. Datacom Systems' 40Gb fiber taps provide your network monitoring and security tools with passive, permanent access to your 40 Gigabit fiber network. Available in a number of different split ratios.
