Datacom Network Tap FTC-509+DEMX1 - 40Gb Passive Fiber Tap Cartridge with 2 LC ports, to tap 2 fiber strands in a single link (4 lambdas per fiber), split ratio 50/50, 9 micron fiber, with 4 separate LC single wavelength output ports for each fiber tapped. Network Tap Speed 40G and Monitoring Tool Speed 40G.
This high density passive Tap system provides permanent access for up to 24 links. The flexible modular design allows tapping fiber links - from 1G up to 100G - including 40/100G SR4 and Cisco BiDi. Different fiber types and split ratios can be mixed - all in the same high density chassis. Individual Tap Modules are of ruggedized all-metal construction. The chassis can be partially or fully populated with a mix of modules, based on the needs of the location.
Benefits
- Flexible - modules are available in custom split ratios and mixed fiber types
- Scalable - add more tap modules as the number of links increases
- Easy to install - individual modules can be added or swapped without interrupting other links
- Cost effective - lower overall cost than fixed tap systems
- Passive and non-powered - no IP Address - 100% secure and immune to remote attacks
- Guaranteed signal integrity - highest quality components used
- Consistent - thin film couplers deliver stable predictable insertion loss without the variation of fused optical couplers
- Full visibility - passes all full-duplex traffic (including errors) from all layers
Tap up to 24 links 1G to100G* - Ideal for security, network monitoring and analysis - anywhere that high density and maximum flexibility are required for monitoring multiple fiber links
Features:
Product Description
- FTC-24 Rack Mount Chassis - holds up to 24 modules
- FTCT-24 Cable Management Tray
- FTC-505 50/50 Module (50 micron)
- FTC-605 60/40 Module (50 micron)
- FTC-705 70/30 Module (50 micron)
- FTC-805 80/20 Module (50 micron)
- FTC-905 90/10 Module (50 micron)
- FTC-506 50/50 Module (62.5 micron)
- FTC-606 60/40 Module (62.5 micron)
- FTC-706 70/30 Module (62.5 micron)
- FTC-806 80/20 Module (62.5 micron)
- FTC-906 90/10 Module (62.5 micron)
Modules
- Two LC connector pairs per module for Tap connections to network link endpoints (MTP connectors used for SR4 and 100G modules)
Monitor Ports
- One LC connector pair per module (both ports Tx) for Monitor connections to Monitoring tools or Network Packet Brokers (MTP connectors used for 40/100GBASE-SR4 modules)
Insertion loss*
- Multimode 50/50: 1G = 4.5 dB | 10G = 3.9 dB
- Multimode 70/30: 1G = 2.0 / 6.1dB | 10G = 3.1 / 5.1dB
- Singlemode 50/50 = 3.9 dB
- Singlemode 70/30 = 2.2 / 6.3 dB
- Singlemode LR4 DeMux 50/50 = 4.8 dB
- Singlemode LR4 DeMux 70/30 = 6.8 / 2.8 dB
- *Insertion loss for 60/40, 80,/20, and 90/10 provided on request
Physical dimensions (HxWxD)
- Rack mount chassis 1.785"x19"x8.45"
- Cable Management Tray: 0.863"x19"x2"
- Standard LC Modules: 1.638"x0.659"x8.40"
- MTP 40/100GBASE-SR4/BiDi modules: 1.638"x1.248"x8.40"
Enviromental
- Operating Temperature: 32° to 104°F (0° to 40°C)
- Storage Temperature -22° to 149°F (-30 to 65°C)
- Humidity: 5 to 90% non-condensing
Product safety information
Manufacturer information:
Datacom Systems
9 Adler Drive, East Syracuse
13057 Syracuse, NY, Vereinigte Staaten
info@titan-commerce.com
www.titan-commerce.com
Responsible person:
Datacom Systems Inc.
Gottlieb-Daimler-Straße 13
35440 Linden, Deutschland
info@titan-commerce.com
https://www.titan-commerce.com
There are no reviews yet.
