Datacom SS-2212-10G SINGLEstream 10G Network Tap Datacom SS-2212-LR-10G SINGLEstream 10 In-Line Network Tap - LR single mode (9 micron)

SKU: 10037-002
GTIN: 4260497576501
HAN: SS-2212-LR-10G
Category: Datacom Systems TAPs
Manufacturer: Datacom Systems

SINGLEstream™ 10G Link Network Tap (10 Taps, 2 Non-Aggregated Monitoring Ports). 10 Gigabit Monitoring for 2 Analyse Tools.

Select

Price on request

Datacom SS-2212-LR-10G SINGLEstream 10G Link Network Tap - LR single mode (9 micron). High data transparency.

Easily used in combination with many tools from WireShark, Tamosoft, etc.

Datacom SS-2212-10G SINGLEstream Link Aggregation Switch - Taps

The SINGLEstream SS-2212-10G is passivley inserted inline and can collect traffic from ten network links and direct two links full duplex traffic toward two outputs. Non-powered, built in fiber taps mean that traffic is safely collected with less that 10ns of latency added to the network. With 2 monitoring ports, you can have 2 copies of full duplex, line rate data streams. Direct Each Tool to Any Tapped Link. The SS-2212-10G is best used where a large number of 10G links need to be troubleshot quickly with one or two analytic devices.

Benefits:

Access up to 80 10G links with 2 analytic tools
100% uptime, fiber taps are built into the device so there is no potential loss of traffic on the network
Eliminate SPAN port contention, oversubscription and configuration errors
Tapped ports can be directed to any monitor port
Up to 8 devices can be stacked to look like a single logical unit

Features:

ANY TO ANY PORTS

Network: Ten (10) SR or LR Network Taps with Dual LC connectors
Monitoring: Two (2) SR or LR Monitoring Ports
Management Port: RJ45
Console Port: DB9

SPLIT RATIO

50/50, 70/30, 80/20
Additional Split Ratios Available

INSERTION LOSS*

Multimode (choose 50/62.5 micron diameter) 50/50 = 4.2 dB
Multimode (choose 50/62.5 micron diameter) 70/30 = 3.0 / 6.7 dB
Singlemode (9 micron diameter) 50/50 = 3.9 dB
Singlemode (9 micron diameter) 70/30 = 2.2 / 6.3 dB

* typical per fiber

POWER REQUIREMENTS

Dual Redundant Hot Swappable Power Supplies (Included)
Maximum Power Consumption: Less than 200 Watts
Individual Power Supply Rating: 100-240V ~47-63Hz 4A MAX.

DIMENSIONS (HXWXD)

1.72 x 19.00 x 26.5 in (4.37 x 48.26 x 67.31 cm)

WEIGHT

18.15 lbs (8.23 kgs)

ENVIRONMENTAL

Operating Temperature: 32º to 104ºF (0º to 40ºC)
Storage Temperature: -22º to 149ºF (-30º to 65ºC)
Humidity: 5 to 90% non-condensing

Product Type:	Singlestream Link Aggregation Taps Network TAPS
Applications:	Monitoring Network analysis Performance Aggregation Load Balancing Remote Management In-Line monitoring