Datacom 40G Fiber Netzwerk Tap for Cisco BiDi Links FTP-1518 50/50 split ratio. 50 micron fiber 40G-BiDi Fiber Network Tap

SKU: 10034-001
GTIN: 4260497576402
Category: Datacom Systems TAPs
Manufacturer: Datacom Systems

FTP-1518 passive fiber network tap 50/50 split ratio. 50 micron fiber, available in different variants. Equipped with two 40Gb LR4 network ports and 8 LC monitor ports. This fiber network TAP from Datacom Systems provide your network monitoring and security tools with passive, permanent access to your 40 gigabit fiber network.

Auswahl

Price on request

Datacom Network Tap FTP-1518 - 40Gb Passive TAP with 4 LC style ports to tap a 40G BiDi fiber link, and output to 4 LC style monitor ports.50/50 split ratio. 50 micron fiber. Network Tap Speed 40G and Monitoring Tool Speed 40G.

Easily used in combination with many tools from WireShark, Tamosoft, etc.

Datacom 40G-BiDi Fiber Network Tap

The FTP-1518 will tap a Cisco 40G BiDi network link, sending a bidirectional copy of traffic from each device out a set of 4 LC monitoring ports. The FTP-1518 gives you access to each wavelength of the fiber connection for monitoring using 40G receive only QSFPs.*

*monitoring device must support these receivers

Benefits:

Monitor outputs are at 850 and 900nm. The FTP-1518 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity. They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.

Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.

Non-powered, passive tap
Optional 1U rack mount holds 3 taps
4U 12 bay rack available

Features:

NETWORK PORT

Two (2) Cisco Bidi 40Gb Network Connections

MONITOR PORT

Four (4) LC Monitor Connections

SPLIT RATIO

50/50

INSERTION LOSS**

Network Ports: 3.8 dB insertion loss

Monitor Ports: 3.8 dB insertion loss

**typical

PHYSICAL DIMENSIONS (H x W x D)

1.07 x 5 x 5 in.
(2.7 x 12.7 x 12.7 cm)

WEIGHT

12 oz. (0.34 kgs)

FIBER TYPE

ENVIRONMENTAL

Operating Temperature: 32º to 104ºF (0° to 40°C)
Storage Temperature: -22º to 149ºF (-30° to 65°C )
Humidity: 5 to 90% non-condensing

Optional Equipment

RMC-3 3-Unit Rack Mount
RMC-12-3 12-Unit Rack Mount

Product Type:	Network TAPS
Port-Speed:	40Gb
Network Tap Speed:	40G
Monitoring Tool Speed:	40G
Network Port Numbers:	1-Port
Applications:	Monitoring Network analysis Performance Security Copying Load Balancing Packet Filtering Failover In-Line monitoring