Datacom 40G-BiDi Fiber Network Tap
The FTP-1518 will tap a Cisco 40G BiDi network link, sending a bidirectional copy of traffic from each device out a set of 4 LC monitoring ports. The FTP-1518 gives you access to each wavelength of the fiber connection for monitoring using 40G receive only QSFPs.*
*monitoring device must support these receivers
Monitor outputs are at 850 and 900nm. The FTP-1518 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity. They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed.Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.
- Non-powered, passive tap
- Optional 1U rack mount holds 3 taps
- 4U 12 bay rack available
- Two (2) Cisco Bidi 40Gb Network Connections
- Four (4) LC Monitor Connections
In order to perform a successful network analysis, we recommend either the free software from wireshark or the relate software from Tamosoft.
You can find Wireshark's software here.
You can find the Tamosoft software here.
PHYSICAL DIMENSIONS (H x W x D)
- 1.07 x 5 x 5 in.
- (2.7 x 12.7 x 12.7 cm)
- 12 oz. (0.34 kgs)
- CE, ROHS
- Operating Temperature: 32º to 104ºF (0° to 40°C)
- Storage Temperature: -22º to 149ºF (-30° to 65°C )
- Humidity: 5 to 90% non-condensing
- Two (2) Year Standard Hardware Warranty
- RMC-3 3-Unit Rack Mount
- RMC-12-3 12-Unit Rack Mount