Datacom 100G-SR4 Fiber NetworkTap FTP-1734 70/30 split ratio. 50 micron 100G-SR4 Fiber Network Tap

SKU: 10035-002
GTIN: 4260497576440
Category: Datacom Systems TAPs
Manufacturer: Datacom Systems

MPN:

FTP-1734

Datacom FTP-1734 - 100 Gigabit network fiber tap, 70/30 split ratio. 50 micron fiber. Taps from Datacom Systems provide your network monitoring and security tools with passive permanent access into your 100GBASE SR4 fiber network. They provide permanent in-line access to network connections - eliminating the need to disconnect and reconnect network plugs every time a segment needs to be analyzed. Our Taps allow you to view Layer 1 and 2 faults that are not visible when monitoring the network with SPAN ports.

Select

Price on request

Datacom Network Tap FTP-1734 - 100GBase-SR4 Passive TAP with MTP connectors, 70/30 split ratio, 50 micron fiber. Network Tap Speed 100G and Monitoring Tool Speed 100G.

Easily used in combination with many tools from WireShark, Tamosoft, etc.

Datacom FTP-1734 - 100G-SR4 100GB Fiber Network Tap

The FTP-1534 will tap a 100GBase-SR4 network link, sending a copy of traffic from each device out 2 MTP ports in SR format. Uses 50 micron fiber. It provides your network monitoring and security tools with passive permanent access into your 100 Gigabit fiber network.

Benefits:

The FTP-1734 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity. They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.

Non-powered, passive tap
Optional 1U rack mount holds 3 taps
4U 12 bay rack available

Features:

NETWORK PORT

Two (2) 100Gb SR4 MTP Network Connections

MONITOR PORT

Two (2) 100Gb SR4 MTP Monitor Connections

SPLIT RATIO

50/50
70/30

INSERTION LOSS**

50/50: 4.6 dB insertion loss
70/30: 6.6/2.6 dB insertion loss

**typical

PHYSICAL DIMENSIONS (H x W x D)

1.07 x 5 x 5 in.
(2.7 x 12.7 x 12.7 cm)

WEIGHT

15 oz (0.43 kgs)

FIBER TYPE

ENVIRONMENTAL

Operating Temperature: 32º to 104ºF (0° to 40°C)
Storage Temperature: -22º to 149ºF (-30° to 65°C )
Humidity: 5 to 90% non-condensing

Optional Equipment

RMC-3 3-Unit Rack Mount
RMC-12-3 12-Unit Rack Mount

Product Type:	Network TAPS
Port-Speed:	100Gb
Network Tap Speed:	100G
Monitoring Tool Speed:	100G
Network Port Numbers:	1-Port
Applications:	Monitoring Network analysis Performance Security Copying Load Balancing Packet Filtering Failover In-Line monitoring