Datacom Network Tap FTP-1534 - 100GBase-SR4 Passive TAP with MTP connectors, 50/50 split ratio, 50 micron fiber. Network Tap Speed 100G and Monitoring Tool Speed 100G.
Easily used in combination with many tools from WireShark, Tamosoft, etc.
Datacom FTP-1534 passive 100G-SR4 100GB fiber network tap
The FTP-1534 will tap a 100GBase-SR4 network link, sending a copy of traffic from each device out 2 MTP ports in SR format. Uses 50 micron fiber. It provides your network monitoring and security tools with passive permanent access into your 100 Gigabit fiber network.
Benefits:
The FTP-1534 is completely passive and uses no electrical power. These network taps are ideal for security applications, network monitoring and anywhere you need to see all the data that only an In-Line solution can provide. Invisible to the network, completely passive and fault-tolerant, fiber taps will not affect network performance or integrity.
They provide permanent In-Line access to network links - eliminating the need for network connectors to be disconnected and connected each time a segment needs to be analyzed. Our taps allow you to view layer 1 and 2 errors not seen when performing network monitoring using SPAN ports.
- Non-powered, passive tap
- Optional 1U rack mount holds 3 taps
- 4U 12 bay rack available
Features:
NETWORK PORT
- Two (2) 100Gb SR4 MTP Network Connections
MONITOR PORT
- Two (2) 100Gb SR4 MTP Monitor Connections
SPLIT RATIO
INSERTION LOSS**
- 50/50: 4.6 dB insertion loss
- 70/30: 6.6/2.6 dB insertion loss
**typical
PHYSICAL DIMENSIONS (H x W x D)
- 1.07 x 5 x 5 in.
- (2.7 x 12.7 x 12.7 cm)
WEIGHT
FIBER TYPE
ENVIRONMENTAL
- Operating Temperature: 32º to 104ºF (0° to 40°C)
- Storage Temperature: -22º to 149ºF (-30° to 65°C )
- Humidity: 5 to 90% non-condensing
Optional Equipment
- RMC-3 3-Unit Rack Mount
- RMC-12-3 12-Unit Rack Mount
Product safety information
There are no reviews yet.
